Categories
Search product
TURBO II
 |
It’s all about cleaner air and longer life for your engine – that’s where turbo II has been performing it’s job in the toughest environments day in and day out. Preventing micro-abrasive dust from entering the engine with it’s unique design, turbo II is still the standard by which all precleaners are judged.From its durable metal construction to its high efficiency and low restriction across the entire range, turbo II is chosen worldwide by equipment operators for installation on loaders, graders, crushers, haulers,mixers, mining machines and anywhere where dust is a problem and where a high level of protection is needed. With four different models we can accommodate the widest range of equipment, offering protection for your engine regardless of application. When its severe duty, specify the best, the turbo II precleaner! |
| The turbo® II Precleaner metal design is the only precleaner that draws dirty air through the protective screen at the top of the unit, creating a “TOP DOWN” air flow. turbo® II Precleaners haveaerodynamically designed overlapping vanes, which force the incoming air to spin,causing separation of dust and dirt from the air by centrifugal force. The dust and debris then spins down the wall of the main chamber, into the blower chamber, where the high velocity spinner forces the dirt out the discharge ports at the base of the unit. In addition, as the velocity of the primary air stream increases, it ejects out additional dirt and debris providing the cleanest possible air to the filter element. This design offers exceptional balance between added restriction and efficiency. |  |
 |
Competitors typically use “REVERESE AXIAL” designs. This means that the air is drawn in through the base of the unit and then must make a “U” turn which adds restriction and robs the engine of power. More restriction means your engine filters do not last as long between changes.
Lastly, all turbo® Precleaners are independently tested to industry SAE J726 standards. |
|
Turbo ® II Heavy Duty Engine Intake Air Precleaner Specifications |
|||||||
|
|
Airflow range |
Inlet size base |
|
|
|
||
|
Model |
CFM |
m3/min |
Inches |
mm |
|
|
|
|
24 |
100-250 |
2.8-7.1 |
3″ or 4″ |
76 or 102 |
|
|
|
|
35 |
250-300 |
7.1-9.9 |
4.5″ |
114 |
|
|
|
|
46 |
300-700 |
8.5-19.8 |
4.5″, 5″, 6″, 7″ |
114, 127, 152, 178 |
|
|
|
|
68 |
700-1100 |
19.8-31.1 |
6″, 7″, 8″ |
127, 152, 178, 203 |
|
|
|
|
O.D. |
Height |
Weight |
|||||
|
Model |
Inches |
mm |
Inches |
mm |
LBS |
kg |
|
|
24 |
8 |
203 |
11 |
279 |
5 |
2.3 |
|
|
35 |
9.25 |
235 |
12.25 |
311 |
6.5 |
2.9 |
|
|
46 |
12.25 |
311 |
15.5 |
394 |
11 |
4.9 |
|
|
68 |
14.5 |
368 |
17.5 |
444 |
16 |
7.3 |
|
| BROCHURES | |
| Turbo II Datasheet | Turbo Precleaner Oveview |
| Turbo Sizing Datasheet | |
