Borserini

Categories

Search product

Self-Cleaning Filters Gap Type Filters

GAP-TYPE FILTER

Proven a thousand times over and  a real classic

Plate gap, Tube gap, and Wire gap-type filters are designed for filtration of heavily contaminated high and low viscous fluids such as fuel, lube oils, paints, polyol, isocyanate, cooling lubricants, etc. Are self-cleaning, and are known for decades to be extremely reliable and easy to operate and maintain.

They can be used in different fields like:

  • Steam Engines and Hydromotors
  • Pumps
  • Hydraulic Systems
  • Machine Tools
  • Gearboxes
  • Medium to large-sized Combustion Engines
  • Food Industry
  • Cleaning of water and liquids for chemical and industrial processes, etc.

Gap-type Filters can be used for the full and partial flow.
Flow direction through the filter inserts is from outside to inside.
Filtration finesse is defined by the gap width.
Filter housing can be available made out of steel, cast iron, aluminum, and other material upon request.

 


 


Different Gap-Type Filter Designs

Plate Gap-Type

01-Einleitung en

Plate gap-type filters for gap widths ≥ 0.1 mm

The plate gap-type filter insert consists of ring-shaped steel discs piled up on a central pin. The gap width between the discs is determined by spacers between the discs. A stationary gap cleaner runs through each gap.
As the liquid flows between the discs, dirt particles in the liquid are deposited on the surfaces of the gap.
When the handle of the filter insert is turned the dirt particles gather on the row of gap cleaners and sink to the sludge collection chamber where the sludge is discharged by opening a ball valve.


Tube Gap-Type

Gap-type tube filters for gap widths ≥ 0.03 mm

The gap-type tube filter insert consists of a wire wound around longitudinal rods welded together at every crossing point.
The longitudinal rods and wire are made of nonrusting, high tensile steel. The exact position of the steel wire on the longitudinal rods provides for equal gaps.
As the liquid to be filtered flows through the filter insert the dirt particles are deposited in the gaps. When the handle on the filter insert is turned, the dirt particles are removed by a stationary scraper and fall down into the sludge collection chamber.
The sludge is discharged by opening a ball valve.


Wire Gap-Type

Wire gap-type filters for gap widths ≥ 0.03 mm
The wire gap-type insert consists of a non-rusting, high tensile steel wire wound in a spiral around an aluminum frame. The exact position of the steel wire on the frame provides for equal gaps. As the liquid to be filtered flows through the insert dirt particles are deposited in the gaps. When the handle of the filter insert is turned the dirt particles are scraped by a stationary cleaner and sink to the sludge collection chamber where the sludge is discharged by opening a ball valve.


 

Gap-Type Filters

Download